Fast increasing of surface ozone concentrations in Pearl River Delta characterized by a regional air quality monitoring network during 2006-2011

Based on the observation by a Regional Air Quality Monitoring Network including 16 monitoring stations, temporal and spatial variations of ozone(O3), NO2and total oxidant(Ox) were analyzed by both linear regression and cluster analysis. A fast increase of regional O3concentrations of 0.86 ppbV/yr was found for the annual averaged values from 2006 to 2011 in Guangdong, China. Such fast O3increase is accompanied by a correspondingly fast NOx reduction as indicated by a fast NO2 reduction rate of 0.61 ppbV/yr. Based on a cluster analysis, the monitoring stations were classified into two major categories – rural stations(non-urban) and suburban/urban stations. The O3concentrations at rural stations were relatively conserved while those at suburban/urban stations showed a fast increase rate of 2.0 ppbV/yr accompanied by a NO2 reduction rate of 1.2 ppbV/yr. Moreover, a rapid increase of the averaged O3 concentrations in springtime(13%/yr referred to 2006 level) was observed, which may result from the increase of solar duration, reduction of precipitation in Guangdong and transport from Eastern Central China. Application of smog production algorithm showed that the photochemical O3production is mainly volatile organic compounds(VOC)-controlled. However, the photochemical O3production is sensitive to both NOx and VOC for O3pollution episode. Accordingly, it is expected that a combined NOx and VOC reduction will be helpful for the reduction of the O3 pollution episodes in Pearl River Delta while stringent VOC emission control is in general required for the regional O3 pollution control.     

煤矿岗前人员不安全状态智能检测系统研究*—以红柳林煤矿为例

为从根本上降低煤矿从业人员实施不安全行为的概率,在充分考虑煤矿从业人员不安全个体状态是诱发其不安全行为的主要原因的基础上,设计开发一套矿工不安全状态智能检测系统。首先,对2007—2022年期间各高危行业安全事故调查报告和专家研究进行归纳,总结得出煤矿从业人员不安全状态的影响因素,构建包括生理状态、心理状态以及个体能力状态在内的3个一级指标和15个二级指标体系;其次,通过相应的表征模型对不安全状态影响因素进行深入剖析;最后,基于构建的从业人员不安全状态倾向数据库,建立煤矿岗前不安全状态智能检测系统。研究结果表明:在下井工作前对从业人员个体状态进行智能检测,能够实现矿工不安全状态“早发现、早干预”,能够有效地降低人因事故发生率,研究结果对煤炭行业安全管理具有重要的参考价值。     

自适应智能电磁防护材料测试方法研究

目的在强电磁场环境下研究自适应智能电磁防护材料的相变特性。方法针对自适应智能电磁防护材料相变前后电导率的变化范围大、需要强场激励状况,考虑测试系统强场生成、大动态范围、测试精度以及相应的绝缘性和较高的安全性要求,采用电容充放电原理设计强场激励测试电路,搭建绝缘环境,确保操作的安全性和测试数据的可靠性。结果利用测试系统对现有商业化电阻器进行验证试验,得到的特性曲线与理论相一致。结论测试系统能够满足自适应智能电磁防护材料相变特性试验的需求,可获取有效且可靠的测试数据。     

基于遗传神经网络的除湿机故障诊断与寿命预测

目的识别除湿机的性能状态和预测吸附剂的剩余寿命。方法针对除湿机故障过程缓变的特点,提出一种基于数据驱动的遗传神经网络模型。首先,为解决设备失效程度划分模糊的问题,由5个热力参数组成反映吸附剂劣化程度的特征向量,关联分析得到除湿机的5类故障模式。其次,利用遗传神经网络建立状态参数和故障模式的映射关系。最后,对表征设备吸附能力的主参数进行外推预测。结果训练好的诊断网络可准确地识别出设备的劣化程度及其演变过程,预测网络的预测精度非常高。结论该方法可有效地实现对除湿机的故障诊断与预测。。     

ABC算法优化SVR的磨损故障预测模型

目的为了提高故障预测的精度,针对支持向量回归SVR(Support vector machine for regression,SVR)参数选择困难的问题,提出一种采用人工蜂群(artificial bee colony,ABC)算法优化支持向量回归(SVR)的故障预测模型(ABC-SVR)。方法该模型先对样本数据进行重构,然后将故障预测误差(适应度)作为优化目标,通过ABC算法寻优找到最优的SVR参数,建立故障预测模型。最后通过实例仿真验证模型的优越性。结果采用ABC算法优化的SVR故障预测模型进行时间序列预测,能够较好地跟踪发动机滑油金属元素浓度的变化过程,并且能够提前2个取样时间预测异常情况的出现。结论 ABC-SVR模型有效解决了SVR参数选择难题,能够更加准确地表现故障变化规律,提高了故障预测精度。     

住宅小区智能化系统的设计实现

以武汉市某住宅的智能化系统设计为实例,从需求分析、投资额度、系统选择、设备配置等方面对楼宇对讲系统、视频监控系统、机房工程、电子围栏系统、弱电管网等进行了论述,并就施工中出现的问题进行了说明,以期为类似工程项目提供参考。     

回采工作面瓦斯涌出量遗传投影寻踪回归预测

为快速、准确预测回采工作面瓦斯涌出量,基于投影降维思想,建立一种遗传算法(GA)投影寻踪回归预测方法。选取煤层瓦斯原始含量、埋藏深度、煤层厚度、煤层倾角、工作面长度、推进速度、采出率、临近层瓦斯含量、临近层厚度、临近层层间距、岩层岩性、开采深度作为评价因子,对某矿15个学习样本进行训练,建立GA投影寻踪回归预测模型。利用该矿3个实测样本对模型进行检验,并与主成分分析和BP神经网络方法结果进行对比。研究表明:利用GA投影寻踪回归预测回采工作面瓦斯涌出量,平均误差为3.43%,最大误差为5.7%,精度优于其他2种方法。     

ATIS环境下驾驶员认知负荷研究进展

为构建更加符合驾驶员认知特性的出行信息环境,提高驾驶员出行信息服务水平,对ATIS环境下驾驶员认知负荷研究进展进行系统分析与评述.首先阐述了认知负荷的理论基础,随后分析了ATIS环境下驾驶员认知负荷的影响因素,同时分类解析了驾驶员内在认知负荷、外在认知负荷与相关认知负荷的产生根源,并对认知负荷的形成机理进行了分析;系统评述了驾驶员认知负荷的测量方法,最后基于驾驶员信息认知负荷提出了ATIS优化对策.结果表明:年龄、性别、受教育程度、月收入、出行经验是影响驾驶员认知负荷的主要因素;道路交通标志的版面设计与驾驶员的标志视认时间关联密切;驾驶过程中拨打手机及使用车载终端均会分散驾驶员注意力,增加驾驶员的信息认知负荷;较高的车速与音频播放等环境会对驾驶员的信息认知能力提出更高要求.     

The Real-World Safety Potential of Connected Vehicle Technology

Objective: This article estimates the safety potential of a current commercially available connected vehicle technology in real-world crashes.

Method: Data from the Centre for Automotive Safety Research's at-scene in-depth crash investigations in South Australia were used to simulate the circumstances of real-world crashes. A total of 89 crashes were selected for inclusion in the study. The crashes were selected as representative of the most prevalent crash types for injury or fatal crashes and had potential to be mitigated by connected vehicle technology. The trajectory, speeds, braking, and impact configuration of the selected in-depth cases were replicated in a software package and converted to a file format allowing “replay” of the scenario in real time as input to 2 Cohda Wireless MK2 onboard units. The Cohda Wireless onboard units are a mature connected vehicle technology that has been used in both the German simTD field trial and the U.S. Department of Transport's Safety Pilot project and have been tuned for low false alarm rates when used in the real world. The crash replay was achieved by replacing each of the onboard unit Global Positioning System (GPS) inputs with the simulated data of each of the involved vehicles. The time at which the Cohda Wireless threat detection software issued an elevated warning was used to calculate a new impact speed using 3 different reaction scenarios and 2 levels of braking.

Results: It was found that between 37 and 86% of the simulated crashes could be avoided, with highest percentage due a fully autonomous system braking at 0.7 g. The same system also reduced the impact speed relative to the actual crash in all cases. Even when a human reaction time of 1.2 s and moderate braking of 0.4 g was assumed, the impact speed was reduced in 78% of the crashes. Crash types that proved difficult for the threat detection engine were head-on crashes where the approach angle was low and right turn–opposite crashes.

Conclusions: These results indicate that connected vehicle technology can be greatly beneficial in real-world crash scenarios and that this benefit would be maximized by having the vehicle intervene autonomously with heavy braking. The crash types that proved difficult for the connected vehicle technology could be better addressed if controller area network (CAN) information is available, such as steering wheel angle, so that driver intent can be inferred sooner. More accurate positioning in the real world (e.g., combining satellite positioning and accelerometer data) would allow the technology to be more effective for near-collinear head-on and rear-end crashes, because the low approach angles that are common in such crashes are currently ignored in order to minimize false alarms due to positioning uncertainty.     

油库泵站可燃气体智能型安全检测系统

根据目前油库泵站内存在可燃气体经常泄漏的实际情况,提出并应用计算机信息处理系统解决可燃气体泄漏监控问题。